TREKFINDER comfort spring set for LAND ROVER Defender 110: front +20 / rear +0 millimetres

TREKFINDER Comfort Spring Kit for LAND ROVER Defender 110 with front +20 / rear +0 millimetres

DESCRIPTION:

• This spring set has been developed for vehicles that have NO fixed fittings and are usually driven empty
• These springs are not ‘reinforced’ springs, but springs designed and intended for a single purpose:
  a.) the Defender should have handling characteristics as close as possible to those of a passenger car: direct, comfortable, sporty, yet not uncomfortable...
  b.) the Defender should have approximately the same ride height at the front and rear axles; therefore, the front springs provide a lift of approx. +20 (ex-works, the Defender is lower at the front than at the rear)
• The springs have been developed in combination with our TREKFINDER Koni RAID dampers
• If only the springs are fitted, it is essential to take into account which shock absorbers are fitted and what condition they are in!

- The lift is +20 millimetres on the front axle and +0
millimetres on the rear axle – tailored to the TREKFINDER® Raid shock absorbers (item nos. 90-5470 and 90-5471)
- For the perfect driving experience, we recommend the TREKFINDER steering damper (item no. 1-LRDELD)

The following LAND ROVER Defender 110 models are approved according to the parts certificate:

Sales designation // Approved axle loads (front/rear) in [kg] // ABE/EG-BE No.:

Defender 110 // 1200 / 1850 // H263
Defender 110 // 1200 / 1850 // H571
Defender 110 // 1200 / 1850 // K738
Defender 110 // 1250 / 1980 // e11*96/79*0086*..
Defender 110 // 1250 / 1980 // e11*2007/46*0133*..

SCOPE OF DELIVERY:

• 4 TREKFINDER® progressive coil springs
• 1 TÜV® parts certificate