Description
TREKFINDER universal fender flares extensions – 20 millimetres wide – chrome-effect finish – including TÜV® certificate
- Suitable for vehicles WITH and WITHOUT an inner edge in the wheel arch, as they are bonded to the side of the fender flares
- Elegant, delicate extension with a subtle chrome finish
- Affordable, versatile and high-quality – the ideal way to enhance your vehicle’s appearance
- Suitable for saloon cars, off-road vehicles, estate cars and SUVs, etc.
- Ideal for track widening using spacers, wider tyres, rims with greater offset, etc.
- The width of the cover provided by the wheel arch extension, measured from the mounting surface, is 20 millimetres; see the online photo with dimensions
- Fitting is carried out using a 3M adhesive strip, which is already attached to the extension; to fit, simply peel off the protective film
- We use genuine 3M adhesive tape, specially developed for automotive surfaces, to attach our extensions – this guarantees an extremely durable bond (please note the fitting instructions listed below)
Contents:
- 1 x TREKFINDER fender flares extension, 20 mm wide and 150 cm long
- 1 x TÜV® test report
- 1 x type plate
- 1 set of fitting instructions
- 1 x photo sheet
ATTENTION – important fitting instructions:
- The mounting surface must be smooth, rust-free, thoroughly cleaned and free of grease
- The outside temperature and the temperature of the components or the mounting surface at the time of installation and for a period of 24 hours thereafter must be at least 20° Celsius
- After removing the backing film from the 3M tape, the width extension must be pressed evenly onto the mounting surface with firm pressure for approximately 1 minute
- Trim the ends of the width extension to suit the look of your vehicle using a sharp carpet knife
- Please leave the vehicle undisturbed for at least 24 hours after fitting, or preferably 48 hours
- The bond will only reach its final strength after 48 hours
- Please do not wash the vehicle for at least 48 hours
- In some installation situations, particularly where the fitting instructions cannot be followed, additional securing is recommended, e.g. using sheet metal screws, bodywork adhesive or primer
Attention – installation instructions:
The adhesive tape we use for this profile is the best that 3M offers for automotive applications.
If the extension fender is being fitted under normal circumstances, there is no need to use primer.
It is important to follow the correct fitting instructions:
1) Thoroughly clean the surface to which the adhesive tape
will be applied 2) Position the profile and apply firm pressure along the entire length of the adhesive tape
3) Correct application temperature: minimum +20°C
4) To ensure the adhesive tape bonds properly, you can apply some masking tape to maintain pressure for the next 24 hours
5) Do not wash the car for 48 hours after application
Katalog Kotflügelverbreiterungen zum blättern (7 Seiten)
| Item information | Value |
|---|---|
| Width in mm: | 20 mm |
| Model series: | Garmisch |
| Mounting type: | Glue |
| Installation direction: | Side |
| Package contents: | 1 Stück 150 cm (1,5 m) |
| Content: | 1,50 m |
Häufig gestellte Fragen
Reviews
All reviews:
Angaben zur Produktsicherheit
| Angaben zum Hersteller: | |
| Firma: | STOCK & STEIN GmbH (Marke: TREKFINDER®) |
| Anschrift: |
Elsper Str. 36 57368 Lennestadt Deutschland |
| Email: | dialog@TREKFINDER.de |
| Webseite: | https://www.TREKFINDER.de |
