TREKFINDER wheel spacer kit for 1 axle for the LAND ROVER Defender: +66 millimetres per axle, with ABE

- Suitable for all Defender models (TDI, TD5 and TD4) with a rear axle
load of up to 2.4 tonnes – with ABE, therefore no MOT test or vehicle registration document amendment required (please note the instructions and specifications at the end of the product description)
– made from high-strength aluminium alloy, black hard-anodised
- with rim centring, ensuring optimal rim fit for alloy wheels with cup nuts
- with a 66-millimetre track widening per axle (33-millimetre-thick discs)
- the scope of delivery for the rear axle includes fixing materials and ABE
– please follow the enclosed care and
fitting instructions – suitable for all Defender models TDI + TD5 + TD4 up to 2.4 t rear axle

load . The following vehicles are approved according to ABE:

Vehicle manufacturer / Manufacturer Serial No.:
Rover (UK) / 2055 Land Rover (UK) / 2140, 2143

Vehicle type:
LD

Commercial designation:
Land Rover Defender
90, -110, -130
(lorries and passenger cars)

EC type-approval No.
H263
H571
K738
e11*96/79*0086*.. +)
e11*2007/46*0133*.. ++)
e11*2007/46*0133*... ++) 

The following vehicles are NOT approved under the ABE:

Defender models where field 2.2 of the vehicle registration certificate is set to “00000”. The ABE does NOT apply to these vehicles!!! For these vehicles, registration by a testing centre in accordance with Section 21 is required.

ATTENTION, IMPORTANT NOTE (also included in paper form with every delivery + explicit instructions in the supplied ABE):

+++ Care instructions for TREKFINDER wheel spacers +++

Do not use aggressive cleaning agents, acids, alkalis or similar substances for cleaning. Use only water or acid-free cleaners. The use of aggressive liquids can lead to corrosion and the resulting loss of fastening material. Clean and inspect the spacers regularly by removing them every 6 months or every 10,000 km, whichever comes first (e.g. when changing between winter and summer tyres). Whenever you change your wheels, check the wheel spacers and fasteners for damage and ensure they are correctly secured. After cleaning, apply anti-seize paste over the entire contact surface on the rim and the vehicle.

It is essential to avoid any contact between anti-seize paste and the threads of bolts and wheel nuts!!!!

Failure to observe these instructions may result in serious property damage and personal injury. Should any issues arise following the purchase and/or fitting of TREKFINDER wheel spacers, please contact your retailer or the fitting workshop. Always keep these documents and the safety and fitting instructions in your vehicle so that you can refer to them at any time.