TREKFINDER Steering Dampener Kit for SUZUKI Jimny I

TREKFINDER steering damper kit for Suzuki Jimny I (FJ model) up to 2018

Suitable for absolutely ALL Jimny I models (manufactured from 1998 to 2018) – regardless of engine, gearbox, body style, import status, 2/4WD, year of manufacture, etc. – our steering damper is designed to fit ALL Suzuki Jimny I models and perform its function optimally – without exception!

– reliably reduces, prevents and eliminates steering wheel vibrations in/on your Jimny
– if all attempts and efforts, such as wheel balancing, wheel alignment, correcting camber, replacing wheel and steering knuckle bearings, etc., have not been successful........this steering damper is sure to help you :)
- Installation of the steering damper is incredibly simple and is carried out on the frame and the tie-rod using a special heavy-duty fitting kit
- Drilling, welding, deburring, painting, etc. are NOT required to fit our steering
damper - Optimal angle to the steering column thanks to fitting with the frame kit and an adjustable tie-rod angle, NO fitting to the thin gusset plate of the towing eye –
direct response thanks to the high rigidity of the two mounting kits; ‘bending’ or ‘twisting’ as occurs with other mounting points, e.g. on the towing eye plate, etc., is ruled out
- highly suitable for Jimnys WITH and WITHOUT suspension lift or drop kits
- The Foam Cell technology in the twin-tube damper prevents gas molecules from mixing with the oil
– the damper, with a 35 mm bore and sintered piston, offers maximum volume with the highest precision of fit
- This ensures a long service life and perfect performance in both on-road and off -road use
– erratic and unstable handling caused by ruts, large tyres, altered caster, track changes, etc., is damped to the maximum extent and
over the long term – track adjustment is NOT required after fitting
- Fits in combination with ALL underrun protection devices known to us

Suitable for the following Jimny models:

> Trade name: Jimny (4WD)
> Vehicle type: FJ
> EC type-approval no.:
e9*XXXX/XXX*0034*..
e6*XXXX/XXX*0056*..

Contents:

• 1 x TREKFINDER steering damper / Foam Cell technology
• 1 x TREKFINDER handlebar mounting kit/galvanised
• 1 x TREKFINDER frame mounting kit/galvanised
• 1 x Installation and fitting instructions
• 1 x TÜV® parts certificate

Note:

The modification carried out will invalidate the vehicle’s roadworthiness certificate unless the modification approval required under Section 19(3) of the StVZO is carried out and confirmed without delay!
Once the technical modification has been carried out, the vehicle must be presented without delay to an officially recognised expert or inspector at a technical inspection centre, accompanied by this parts certificate.
Once the modification inspection has been carried out, proof of this must be carried with the vehicle documents and presented to the relevant authorities on request.
This requirement ceases to apply once the vehicle documents have been amended.