TREKFINDER complete suspension kit for SUZUKI Jimny I – increased load capacity for winter road maintenance

TREKFINDER complete suspension kit for the SUZUKI Jimny I, designed to increase axle load capacity for winter road maintenance 

- Load increase exclusively for vehicles used in winter road maintenance (with snow plough and/or salt spreader)
– the increase is 900 kg on both the front and rear axles, bringing the total to 1
,650 kg – the standard shock absorbers can still be used
- The original steel wheel must be fitted: 15x5.5 JJ rim with 205/70R15 tyres (if other wheel combinations are used, a separate technical report must be available for them and the load-bearing capacity must be sufficient)
- The progressive spring rate of the coil spring set ensures a comfortable ride
for the Jimny even without winter service equipment – the maximum permitted speed with a snow plough and/or gritter fitted is 65 km/h –
without a plough and/or spreader, there is no speed limit!!!

Permissible axle load on axle 1: 900 kg
Permissible axle load on axle 2: 900 kg
Permissible gross vehicle weight: 1650 kg

Suitable for the Jimny I model:

• Jimny I Type FJ up to 2018
• all models and variants 
• with ABE-EG number: e6*xx/xx*0056*.. e9*xx/xx*0034*..

Contents:

+ 2 TREKFINDER coil springs for the front axle, progressively wound
+ 2 TREKFINDER coil springs for the rear axle, progressively wound
+ 2 KONI shock absorbers for the front axle, Heavy Track, 5-way adjustable
+ 2 x KONI shock absorbers for the rear axle, Heavy Track, 5-way adjustable
+ 1 x TREKFINDER TÜV® type approval certificate

Customer enquiry section >>> our replies:

Good afternoon, We require a reinforced spring on the rear axle for our Jimny FJ emergency vehicle. Is this kit permitted without a registered winter kit? Is it supplied with EC type-approval or does it need to be registered? Regards, A.
>>>
1. The winter service equipment forms the basis for type approval; the spring set may remain in the vehicle whilst the equipment is not fitted, and the vehicle still drives comfortably without it :)
2. The suspension is supplied exclusively with a TÜV parts certificate, i.e. the following rules apply:

Notes for the vehicle owner:
The modification inspection must be carried out and confirmed without delay.
The modification carried out will invalidate the vehicle’s type approval unless the modification approval required under Section 19(3) of the StVZO is carried out and confirmed without delay, or unless the specified conditions are not met!
Once the technical modification has been carried out, the vehicle must be presented without delay, together with this parts certificate, to an officially recognised expert or inspector at a technical inspection centre, or to a test engineer at an officially recognised monitoring organisation, for the prescribed modification approval to be carried out and confirmed.

Carrying documents:
Once the modification approval has been carried out, proof of this must be carried with the vehicle documents and presented to the relevant authorities on request; this requirement ceases to apply once the vehicle documents have been amended.

Amendment of vehicle documents:
The vehicle owner must apply to the relevant registration authority for the vehicle documents to be amended in accordance with the specifications set out in the modification approval. Further details can be found in the modification approval.